TPARTMIN

Tile Operation Diagram

TPARTMIN tile operation

Introduction

Partial elementwise min with implementation-defined handling of mismatched valid regions.

Math Interpretation

For each element (i, j) in the destination valid region:

\[ \mathrm{dst}_{i,j} = \begin{cases} \min(\mathrm{src0}_{i,j}, \mathrm{src1}_{i,j}) & \text{if both inputs are defined at } (i,j) \\ \mathrm{src0}_{i,j} & \text{if only src0 is defined at } (i,j) \\ \mathrm{src1}_{i,j} & \text{if only src1 is defined at } (i,j) \end{cases} \]

Assembly Syntax

PTO-AS form: see PTO-AS Specification.

Synchronous form:

%dst = tpartmin %src0, %src1 : !pto.tile<...> -> !pto.tile<...>

IR Level 1 (SSA)

%dst = pto.tpartmin %src0, %src1 : (!pto.tile<...>, !pto.tile<...>) -> !pto.tile<...>

IR Level 2 (DPS)

pto.tpartmin ins(%src0, %src1 : !pto.tile_buf<...>, !pto.tile_buf<...>) outs(%dst : !pto.tile_buf<...>)

C++ Intrinsic

Declared in include/pto/common/pto_instr.hpp:

template <typename TileDataDst, typename TileDataSrc0, typename TileDataSrc1, typename... WaitEvents>
PTO_INST RecordEvent TPARTMIN(TileDataDst& dst, TileDataSrc0& src0, TileDataSrc1& src1, WaitEvents&... events);

Constraints

  • Implementation checks (A2A3):
  • dst/src0/src1 element types must be identical, and must be one of: int32_t, int16_t, half, float.
  • All three tiles must be row-major (isRowMajor).
  • Runtime: if dst.GetValidRow() == 0 or dst.GetValidCol() == 0, the op returns early.
  • Runtime: the implementation requires at least one input's valid region to match dst's valid region, and the onther's valid region not greater than dst's valid region (otherwise it asserts).
  • Implementation checks (A5):
  • dst/src0/src1 element types must be identical and must be one of: int8_t, uint8_t, int16_t, uint16_t, int32_t, uint32_t, half, bfloat16_t, float.
  • Runtime: if any of src0/src1/dst has a zero valid region, the op returns early.
  • Requires src0 and src1 valid region to be <= dst valid region in both dimensions; other patterns are not supported (target-defined behavior).

Examples

Auto

#include <pto/pto-inst.hpp>

using namespace pto;

void example_auto() {
  using TileT = Tile<TileType::Vec, float, 16, 16>;
  TileT src0, src1, dst;
  TPARTMIN(dst, src0, src1);
}

Manual

#include <pto/pto-inst.hpp>

using namespace pto;

void example_manual() {
  using TileT = Tile<TileType::Vec, float, 16, 16>;
  TileT src0, src1, dst;
  TASSIGN(src0, 0x1000);
  TASSIGN(src1, 0x2000);
  TASSIGN(dst,  0x3000);
  TPARTMIN(dst, src0, src1);
}

ASM Form Examples

Auto Mode

# Auto mode: compiler/runtime-managed placement and scheduling.
%dst = pto.tpartmin %src0, %src1 : (!pto.tile<...>, !pto.tile<...>) -> !pto.tile<...>

Manual Mode

# Manual mode: bind resources explicitly before issuing the instruction.
# Optional for tile operands:
# pto.tassign %arg0, @tile(0x1000)
# pto.tassign %arg1, @tile(0x2000)
%dst = pto.tpartmin %src0, %src1 : (!pto.tile<...>, !pto.tile<...>) -> !pto.tile<...>

PTO Assembly Form

%dst = tpartmin %src0, %src1 : !pto.tile<...> -> !pto.tile<...>
# IR Level 2 (DPS)
pto.tpartmin ins(%src0, %src1 : !pto.tile_buf<...>, !pto.tile_buf<...>) outs(%dst : !pto.tile_buf<...>)